the flyin hillbilly raysun teem, and the old junk chevelle

[Rapid Randy Baker]

Altered lingo:

A bit Loose,,smoking the tires from the 330 cones thru the traps!

Kinda out of shape,,,you could read both sides of the car from the 660 cones on!

I wasn't sure it was gonna make it down thru there,,,,Sliding sidways thru the finish line beams!

Had to abort the run,,,,consisted of at least {2} 360's and must touch one or both guard rails!

[flyinhillbilly]

got the rearend torn down for kathy's chevelle, everything looks good but i'm going to put all new bearings, races, and seals throughout. it wouldn't hurt a fat boy like me to do a little walkin, but i don't want her to have to

[flyinhillbilly]

i was also looking at the axles, i'm sure glad i put the 9 inch in before test driving, i could see those spindly little things lasting about 1/1000th of a second when i released the transbrake

[Lippy]

Yep,....KaBoom!!

[flyinhillbilly]

i ordered the sheetmetal today for the interior of the ojc, i get to pick it up tomorrow at lunch, i also discovered a fel-pro 2909 rear main seal for a line bored 400 small block duoh!! i guess i'll have to pull the motor again, the tranny went out in my 77 gmc so i need to get it out and took to eddie so i'll have something to drive again, i'll probably do that tomorrow after work, the hardest part will be that huge a$$ np205 transfer, those things ain't light, i'll post pics of the new floors when we get em in.

[flyinhillbilly]

i got the draglist.com decals on the windows of the ojc today, for a picture see the draglist.com decals ready thread page 4, i also went and picked up some of the sheet metal for the ojc, i got the passenger side somewhat in place and rivited, lots of spot welding to do , we also installed the magic performance enhancing 1/2" carb spacer ( nitrous plate ) today, i didn't bring any jets with me today so we just black taped up the ends. i put a new transbrake button in yeasterday and forgot to mention it as my old one had gone bad so i'm back to doing tbrake burnouts in the shop again sorry billy, i just can't help myself.

[Billy Mac]

least yours can be cranked up FOR those burnouts.....I be jealous

[flyinhillbilly]

yea , maybe, but yours will probably be faster, i figure that if i'm real lucky my pile will run somewhere around 5.80, didn't you say you were going index racing...................on a 5.30?

[Billy Mac]

that's the "plan".....remains to be seen how far I'm off just "on the motor"....I feel like I'm gonna HAVE to spray it...just hope it won't require a Big hit.......with that said......IF (great big fat fuzzy IF!!) I ever win one of these lotto's.....you can just bet the farm that I'll shoe horn enough cubic inches in that go-cart chassis of mine to run the number like its a cake walk...(sawwy Rapid )......until that time.....this ol' lowbuck boat anchor is gonna have to get the job done (or get a dose of giggle juice right in the kisser!!)

pre-stage light on....purge button....psssttt....pssssssssttttt...horn button pushed....aaaAAAAAAOOOOGGAAA!!!!..........ppssssttt.......pppssssttt....LOL!!!

[wheelzman]

pre-stage light on....purge button....psssttt....pssssssssttttt...horn button pushed....aaaAAAAAAOOOOGGAAA!!!!..........ppssssttt.......pppssssttt....LOL!!!

I loved it Billy. You crazy man!!!! aaaaAAAAOOOGGGAAAA.